Fixed setting manual reset bulb and capillary limiter IP65
Applications
-Remote control in usual industrial applications and environments, not hazardous areas, for use as high limit safety.
-Sealed temperature set point
-Internal reset is convenient for products that must not be frequently reset.
| Housing raw material | |
|---|---|
| Color | |
| Ingress protection | |
| Mechanical protection | |
| Contact Material | |
| Electrical rating | |
| Voltage | |
| Electrical life (cycles at rated value) | |
| Measurement type | |
| Sensing element |
| Enclosure | Type | Operation | Contact | Measurement | Ranges °C | Models |
| IP65, IK10 | manual reset | Mechanical | SPNC | Remote |  |
Y1I8L
& Y1G8L |
|
Material |
 |
 |
 |
 |
||
|
Aluminum |
Applications
-Remote control in usual industrial applications and environments, not hazardous areas, for use as high limit safety.
-Sealed temperature set point
-Internal reset is convenient for products that must not be frequently reset.
Housing:Aluminum, IP65, IK10. Mounted on a SUS304 stainless steel wall mounting plate which keeps the temperature sensing element away from the wall. Grey RAL7032 epoxy painting. Stainless steel captive cover screws. Captive aluminum lid
Action:Fail safe manual reset high temperature limit.
Set point calibration value:80±8°C (176±15°F), 90±8°C (194±15°F), 110±8°C (230±15°F), 130±8°C (266±15°F), 150±8°C (302±15°F),
175±8°C (347±15°F), 220±11°C (428±20°F), 270±13°C (518±23°F), 300±15°C (572±27°F). Other calibration temperature on request, between 30°C and 320°C (85°F and 610°F)
Temperature adjustment:Fixed setting, sealed, no access to user.
Sensing element:Liquid expansion bulb and capillary. The capillary is protected by a stainless steel corrugated pipe terminated by a silicone tip. A plastic cap plug provided as standard accessory allows locking the flexible metal conduit inside a pocket. (See pockets in the accessories section)
Electrical connections:Inside, on screw terminal connection block. Possibility to connect two wires 1.5mm² on each terminal.
Pilot light: Allows to visualize limiter contact output position. Standard for all models with transparent window. Non-standard and on special request only for models with plain aluminum cover. (230V, 2 phase power supply, is mandatory for the pilot light)
Cable input and output:Two M20 cable glands, Black PA66.
Earthing:Internal and external screw terminal.
Cable output:M16 cable gland, PA66, for cables up to 10 mm dia.
Mounting:Wall mounting, by 4 holes for screws dia. 4 to 5 mm, 94 x 92 mm distance.
Identification:Metallic identification label, riveted. Set point calibration is printed in °C and °F beside the manual reset button.
Contact:Single pole, open on temperature rise (SPNC)
Electrical rating:16A res. 250/400VAC
-Electrical life > 6.000 cycles.
Minimum storage temperature:-35°C (-30°F)
Maximum ambient temperature:60°C (140°F)
For more technical information ask 8L limiter technical data sheet
Main references
Downloadable
Datasheet
Related products
Room and antifreeze temperature limiter boxes
Immersion heater temperature limiter boxes
Pipe surface temperature control boxes
FIRE DETECTION
Rod temperature control boxes
Pipe surface temperature control boxes
Pipe mounting electronic temperature control thermostat IP65
Remote temperature control boxes
Rod temperature limiter boxes
