Bulb and capillary manual reset limiter IP66, IK10
Equipment requesting a very strong resistance to water ingress. The transparent cover allows to visualize the set point and the 2 pilot lights
Remote control in usual industrial applications and environments, not hazardous areas, for use as high limit safety.
Sealed temperature set point.
| Housing raw material | |
|---|---|
| Color | |
| Ingress protection | |
| Mechanical protection | |
| Contact Material | |
| Electrical rating | |
| Voltage | |
| Electrical life (cycles at rated value) | |
| Measurement type | |
| Sensing element |
| Enclosure | Type | Operation | Contact | Measurement | Ranges °C | Models |
| IP66, IK10 | Manual reset | Mechanical | SPNC | Remote |  |
YF9LNC |
|
Material |
 |
 |
 |
 |
||
|
PA66 & PC |
-Equipment requesting a very strong resistance to water ingress. The transparent cover allows to visualize the set point and the 2 pilot lights
Remote control in usual industrial applications and environments, not hazardous areas, for use as high limit safety.
- Sealed temperature set point
Housing:Protection class IP 66 upon EN 60529 (waterproof spray water under high pressure and sea splashes, totally dust tight). Body in black PA66, fiber glass reinforced. The transparent polycarbonate cover can be unscrewed by hand, but it is also possible to use a hook spanner. Mechanical impact resistance : IK10. High UV resistance.
Action: Fail safe，manual reset high temperature limit.
Set point calibration value: 80±8°C (176±15°F), 90±8°C (194±15°F), 110±8°C (230±15°F), 130±8°C (266±15°F), 150±8°C (302±15°F),
175±8°C (347±15°F), 220±11°C (428±20°F), 270±13°C (518±23°F), 300±15°C (572±27°F). Other calibration temperature on request, between 30°C and 320°C (85°F and 610°F).
Temperature adjustment: Fixed setting, sealed, no access to user.
Sensing element: Liquid expansion bulb and capillary. The capillary is protected by a stainless steel corrugated pipe terminated by a silicone tip. A plastic cap plug provided as standard accessory allows locking the flexible metal conduit inside a pocket (See pockets in the accessories section).
Pilot lights:One pilot light visualizes the thermostat contact output position. The other visualizes the power supply input. Phase and neutral electrical line supply are mandatory for these pilot lights.
Cable input and output: Two M20 cable glands, built-in black PA66.
Electrical connections: Inside, on screw terminal connection block. It is possible to connect 2 wires 1.5mm² on each terminal.
Earthing: Internal screw terminal.
Mounting: Wall mounting, by 2 legs with holes for screws dia. 4 to 5 mm, 114 mm distance
Identification: Identification label on backside. Set point calibration is printed in °C and °F beside the manual reset button.
Contact: Single pole, open on temperature rise (SPNC)
Electrical rating:16A res. 250/400VAC
-Electrical life >6.000 cycles.
Minimum storage temperature: -35°C (-30°F)
Maximum ambient temperature: 60°C (140°F)
For more technical information see 8L limiter technical data sheet
Main references
Downloadable
Datasheets
Related products
Remote temperature control boxes
Rod temperature control boxes
Room and antifreeze temperature limiter boxes
Immersion heater temperature limiter boxes
Immersion heater temperature control boxes
Immersion heater temperature limiter boxes
Adjustable electronic manual reset limiter for immersion heater IP66, IK10
Remote temperature limiter boxes
Manual reset electronic adjustable limiter, remote sensor, IP65
Rod temperature limiter boxes
High corrosion resistant manual reset electronic rod limiter IP66, IK10
