Send an inquiry

Electronic rod thermostat temperature control IP66, IK10

Applications

-Equipment requesting a very strong resistance to water ingress. The transparent cover allows to visualize the set point and the 2 pilot lights

Temperature control with reduced differential, on-off action, in usual industrial application and environment, not hazardous areas.  These electronic rod thermostats are installed inside pockets as immersion thermostats in pipelines and containers, and for monitoring temperature in air ducts. (Not suitable for hazardous areas).

-Very small differential

Housing raw material

,

Color

Ingress protection

Mechanical protection

Contact style
Electrical rating

Voltage

Electrical life (cycles at rated value)

Measurement type

Sensing element

Differential (°C)

Setting adjustment

Rod length (mm)

Rod raw material

SKU: N/A Category: Tags: , , , ,
Enclosure Type Operation Contact Measurement Ranges °C Models
IP66, IK10 Control Electronic SPNO or SPNC Probe YF42NC & YF44NC
 

Material
 

PA66 & PC

Applications

-Equipment requesting a very strong resistance to water ingress. The transparent cover allows to visualize the set point and the 2 pilot lights

Temperature control with reduced differential, on-off action, in usual industrial application and environment, not hazardous areas.  These electronic rod thermostats are installed inside pockets as immersion thermostats in pipelines and containers, and for monitoring temperature in air ducts. (Not suitable for hazardous areas).

-Very small differential

Housing:Protection class IP 66 upon EN 60529 (waterproof spray water under high pressure and sea splashes, totally dust tight). Body in black PA66, fiber glass reinforced. The transparent polycarbonate cover can be unscrewed by hand, but it is also possible to use a hook spanner. Mechanical impact resistance : IK10. High UV resistance.

Set point adjustment:By °C printed knob. All types have an adjustable rotation limit system located inside the knob that allows reducing the set point adjustment span. °F printed knobs available as an option.

Operation:Microprocessor electronic thermostat, on-off action

Set point adjustment ranges: 4-40°C (40-105°F); 30-90°C (85-195°F); 30-110°C (85-230°F).

Differential:Differential is preset at the minimum value, but can be increased with a potentiometer located under the set point adjustment knob.

Sensing element:Dia. 5mm NTC sensor (10KOhms @25°C),  inside nickel plated brass pocket.  Thread ½” BSPT. Tube outside diameter 8mm. Maximum temperature on the probe: 120°C (250°F). Located at the bottom of the housing, 2 screws are used to secure standard pockets. (See the compatible brass pockets range in the accessories section).

Pilot lights:One pilot light visualizes the thermostat contact output position. The other visualizes the power supply input. Phase and line 230V power supply is mandatory for these pilot lights.

Cable input and output: Two M20 cable glands, built-in black PA66.

Electrical connections: Inside, on screw terminal connection block. It is possible to connect 2 wires 1.5mm² on each terminal.

Earthing: Internal screw terminal.

Mounting: By the pocket thread or by 2 legs with holes for screws dia. 4 to 5 mm, 114 mm distance.

Identification: Identification label on backside.

Contact: SPST. 16A (2.6), 250VAC. Open or close on temperature rise. Model with contact closing on temperature rise is used for refrigeration. Version with contact opening on temperature rise is used for heating.

Electrical life: >100.000 cycles.

Minimum storage temperature: -35°C (-30°F)

Maximum ambient temperature: 60°C (140°F)

For more technical information ask 2PE2N6 thermostat technical data sheet.

Main references

Downloadable

Datasheets

Related products

Quick View

Rod temperature control boxes

Electronic rod thermostat temperature control IP65

Quick View

Bimetal surface thermostats

Dia. 10mm cartridge thermostat 1/2″BSPT or M14x1.5 fitting, calibration from 50 to 120°C

Quick View

Pipe surface temperature limiter boxes

Manual reset electronic pipe mounting adjustable limiter IP65

Quick View

Rod temperature control boxes

rod thermostat temperature control IP65

Quick View

Remote temperature control boxes

Electronic temperature control, remote sensor, IP65

Quick View

Remote temperature control boxes

Remote sensor electronic thermostat IP66, IK10

Quick View

Immersion heater temperature limiter boxes

Adjustable electronic manual reset limiter for immersion heater IP66, IK10

Quick View

Rod temperature limiter boxes

High corrosion resistant manual reset electronic rod limiter IP66, IK10

Technical informations associated to this product

  • Main properties of plastic raw materials used for enclosures

    The classic housings, with only 5 sides and a lid, require a long and costly layout, most of the time ignoring the application needs: security, fire resistance, water penetration, shocks, UV, temperature, etc.

  • Electrical protection classes

    The housings are designed to protect electrical equipment located inside. This protection must be considered in the electrical and environmental angles.)

  • Thermostats installation

    The proper functioning of a thermostat depends primarily on the correct choice of the component, but also the conditions of its installation. Conditions used to calibrate regulating and control equipment in the factory are always ideal laboratory conditions, ensuring measurement accuracy and repeatability. These conditions are rarely those found in practice when installing thermostats. However, with a minimum of constraints, it is possible to optimize assemblies.

  • Electrical contacts

    As numerous mechanisms exist, we decided not to distinguish on the basis of constructive technique, but according to their operation speed, which is the key element.