Elevated terminal plastic connection blocks
In electrothermal connection applications, especially in immersion heater connection boxes appear specific constraints: high ambient temperature, frequent thermal cycles, and confined space around the ends of the heating elements and their terminals, making difficult to the user to make connections.
These terminals have been developed to address these constraints.
Applications
In electrothermal connection applications, especially in immersion heater connection boxes appear specific constraints: high ambient temperature, frequent thermal cycles, and confined space around the ends of the heating elements and their terminals, making difficult to the user to make connections.
These terminals have been developed to address these constraints.
Main features, identical for all types
Body: Glass-filled Polyamide 66, UL94V, GWFI 960°C, ambient temperature up to 150°C.
Terminals: M3, M3.5 or M4 screw terminals with captive elastic notched washer, resistant to loosening from vibration or thermal cycling. These terminals can receive bare wire, or tinned, or equipped with cable shoes, fork terminals or eyelet terminals. M3, M3.5 or M4 screw and the spring washer may be replaced by a 4.8×0.8 tab.
Voltage: 400V max.
Wire gauge: Each terminal accepts on each side two conductors from 0.5mm² to 2.5mm².
Maximum rating per terminal: 24 Amp. Corresponding to 17°C self-heating in free air of the terminal. (Upon IEC60947-7)
Mounting: M3 screws or ST3.5 self-tapping screws
Main references
 |
 |
With less than 20mm wide, this 2 way connection block is designed for tightest spaces. |
|
| Reference | BE2E000000HP000 | ||
 |
 |
This connection block was developed to be superimposed on existing terminals of thermostats with enclosure, of Y0A Y0B, Y0D series and any Y2 series. It allows to add 3 interconnected terminals to one of the terminals located below, on which it is connected by a jumper. Particularly useful for connecting neutral when several neutral wires arrive in the enclosure. |
|
| Reference | BF3F3000000NP000 | ||
 |
 |
This 3 way elevated connection block can be positioned above the wire exit of cartridge heaters |
|
| Reference | BE3E3000000JP000 | ||
 |
 |
With its maximum size of 52mm diameter, this 5 way terminal block is compatible with the connections of 1″1/2 and M45 fittings. It fits inside the cylindrical housings of 52mm. An adapter enables its mounting on the fittings. (See hereunder) The central earthing terminal allows direct connection to the brass fittings with central earth thread |
|
| Reference | BE5E5000000KP000 | ||
 |
 |
Adaptator, is mounted under the connection block BE5E5000000KP000 with 4 self-tapping screws, and allows to mount the connection block on brass fittings with 3 screws M4 at 120° on a diameter of 44 mm |
|
| Reference | BE2E000000HP000 | ||
 |
 |
This 6 way elevated terminal block can be positioned above tubular heater terminals, and it fits inside 105x105mm square aluminum and stainless steel housing and also inside the 100mm diameter plastic housing. |
|
| Reference | BE6E6000000MP000 | ||
Downloadable
Related products
Metallic housings
Immersion heater temperature limiter boxes
Adjustable electronic manual reset limiter for immersion heater IP66, IK10
Immersion heater temperature limiter boxes
Plastic housings
Miniature PA66 enclosure, removable wall mounting bracket, Y3A3
