Waterproof manual reset disc thermostats
Manual reset safety thermostats, for applications where there are risks of condensation or water drops. The thermostat body, including the cup crimping zone, is inside an epoxy potting.
Electrical rating | |
---|---|
Voltage | |
Bracket material | |
Bracket type | |
Opening temperature (°C) |
Applications
Manual reset safety thermostats, for applications where there are risks of condensation or water drops. The thermostat body, including the cup crimping zone, is inside an epoxy potting. The manual reset button is accessible by a small silicone cap partially embedded in the epoxy resin. The 2 wires output, in addition to protection against ingress of water, also protects users against accidental contact with live terminals.
Main features
Thermostat Housing: High temperature black epoxy, diameter 16.2 mm. Good UV resistance. Excellent wire pull strength. Maximum ambient temperature 120 °C.
Temperature sensing cup: Stainless steel, not over-molded to improve temperature measurement. (Achievable in aluminum on request)
Contact: SPNC, open on temperature rise.
Reset: Manual
Electrical rating: 10A resistive, 250VAC, 1000 cycles.
Wires: XLPE insulated, 300V, AWG16 (1.5mm²), stranded, temperature resistance 125°C, according to UL3266.
Wire terminations: Stripped on 6mm (wire end terminals or other terminals on request)
Calibration temperatures: Available on request from 40 to 120°C. Standard tolerances +/- 5 ° C.
MOQ 1000 pieces applicable for specific values.
Product identification: Reference label on the wires and coded date on the thermostat cup
Mounting: Two modes: flat bracket (type A) for measuring surface temperature, or extended cup bracket ( type B) for through wall measurement .Main references with 1 meter wires, T125°C XLPE, AWG16 (1.5mm²).
Main references with 1 meter wires, T125°C XLPE, AWG16 (1.5mm²).
References | Open | Tolerance | Bracket style | Bracket material |
4REMRR055DBSY100 | 55°C/131°F | ±3°C/±5.4°F | B | Stainless steel |
4REMRR065DBSY100 | 65°C/149°F | ±4°C/±7.2°F | B | Stainless steel |
4REMRR075DBSY100 | 75°C/167°F | ±4°C/±7.2°F | B | Stainless steel |
4REMRR085DBSY100 | 85°C/185°F | ±4°C/±7.2°F | B | Stainless steel |
4REMRR090DBSY100 | 90°C/194°F | ±4°C/±7.2°F | B | Stainless steel |
4REMRR120DBSY100 | 120°C/248°F | ±4°C/±7.2°F | B | Stainless steel |
4REMRR055DASY100 | 55°C/131°F | ±3°C/±5.4°F | A | Stainless steel |
4REMRR065DASY100 | 65°C/149°F | ±4°C/±7.2°F | A | Stainless steel |
4REMRR075DASY100 | 75°C/167°F | ±4°C/±7.2°F | A | Stainless steel |
4REMRR085DASY100 | 85°C/185°F | ±4°C/±7.2°F | A | Stainless steel |
4REMRR090DASY100 | 90°C/194°F | ±4°C/±7.2°F | A | Stainless steel |
4REMRR120DASY100 | 120°C/248°F | ±4°C/±7.2°F | A | Stainless steel |
Downloads
Datasheets
Related products
Pipe surface temperature limiter boxes
Manual reset electronic pipe mounting adjustable limiter IP65
Rod temperature limiters
Dia. 10mm cartridge thermostat 1/2″BSPT or M14x1.5 fitting, calibration from 50 to 120°C
Explosion proof ATEX/IECEx temperature limiters
Room and antifreeze temperature control boxes
Fixed setting ambiance or antifreeze thermostat, IP65 backside output, without pilot light
Disc thermostats
Bulb and capillary thermostats
Single pole high rating (30A) bulb and capillary thermostats
Technical informations associated to this product
-
Electrical contacts
As numerous mechanisms exist, we decided not to distinguish on the basis of constructive technique, but according to their operation speed, which is the key element. -
Electrical protection classes
The housings are designed to protect electrical equipment located inside. This protection must be considered in the electrical and environmental angles.) -
Description of temperature controls
Used as control thermostats or as a safety thermostat with manual reset, these thermostats have a disc made of two different metals laminated together for temperature sensing element. These two metals have different expansion coefficients. -
Important extracts of standards related to control or safety circuits
§3.8.1 All-pole cut out: Cutting in two conductors in a single operation, or for three phase units, the cut of the three conductors in a single step … Note: for three-phase, the neutral lead is not considered as a power conductor.