Send an inquiry

PVDF temperature sensor enclosure highly corrosive environments, Y3E8

Precise temperature control for surface treatment or corrosive liquid baths, sea water environment, livestock premises.

Dimensions 105 × 105 × 82 mm
Housing raw material

Ingress protection

Mechanical protection

Volume (cm³)

SKU: Y3E8 Categories: , Tags: , , , , , , ,

Red dimensions inside rectangular frames on drawings are used for accessories assembly.

Main applications

Precise temperature control for surface treatment or corrosive liquid baths, sea water environment, livestock premises.

Raw Material: White PVDF body,  Very good resistance to strong bases, good resistance to acids. For use on liquids up to 110 °C.

Housing: Protection class IP69K upon EN 60529 (waterproof spray water under high pressure and sea splashes, totally dust tight), dia. 105mm, height 82mm, made of plastic.

Cover gasket and cable gland stuffing sets gaskets are made in EPDM. Rod seal is made of fluorocarbon elastomer FKM (Viton). The cover can be unscrewed by hand, but it is also possible to use a hook spanner.

Mounting:

-By the 1″ BSPT thread (Mounting through wall is watertight when used with the 1″ nut and seal. See accessories)

-By a rotatable plastic bracket, enabling mounting on tank edge (See accessories)

-By the 2 legs on the side (2 holes dia 5 mm center distance 113 mm)

 

Main references

Accessories

 

1” BSPP Nut, 5mm thickness

 Bracket for tank side mounting, thickness 10mm (Assembly made with 1” nut) 1” gasket for through wall waterproof mounting with 1” nut
 

   

 

    

 

 

 
Reference in PA66: 66YFHN1N Reference in PA66: 66YFMB1N  

Reference in FKM (Viton): 66YGA1F
Reference in PP: 66YFHN1P Reference in PP: 66YFMB1P
Reference in PVDF: 66YFHN1V Reference in PVDF: 66YFMB1V

3D models are available on request under .stp format

Downloads

Datasheets

Drawings

Related products

Quick View

Plastic housings

Polypropylene immersion heater enclosure for highly corrosive environments, Y3C7

Quick View

Plastic housings

Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater, Y301

Quick View

Plastic housings

Sub-miniature PA66 enclosure, removable wall mounting bracket, Y3A1

Quick View

Plastic housings

PVDF immersion heater tube enclosure for highly corrosive environments, Y3E6

Quick View

Plastic housings

Enclosure with window, for controls, connection, temperature sensor, thermostat, level sensor, GFCI, Y3N2

Quick View

Plastic housings

Immersion heater enclosure with extension, in PA66 and PC Y3F3

Quick View

Plastic housings

Enclosure with window for immersion heaters, with extension, Y3N3

Quick View

Plastic housings

Temperature sensor, thermostat or level sensor PA66 enclosure, Y3B1

Technical informations associated to this product

  • Electrical protection classes

    The housings are designed to protect electrical equipment located inside. This protection must be considered in the electrical and environmental angles.)

  • Main properties of plastic raw materials used for enclosures

    The classic housings, with only 5 sides and a lid, require a long and costly layout, most of the time ignoring the application needs: security, fire resistance, water penetration, shocks, UV, temperature, etc.

  • Description of temperature controls

    Used as control thermostats or as a safety thermostat with manual reset, these thermostats have a disc made of two different metals laminated together for temperature sensing element. These two metals have different expansion coefficients.

  • Electrical contacts

    As numerous mechanisms exist, we decided not to distinguish on the basis of constructive technique, but according to their operation speed, which is the key element.