Send an inquiry

Wall mounting temperature sensor enclosure, In PA66 and PC, Y3F1

– Features a sealed sensor cable exit system at the top
– Includes mounting bosses for printed circuit boards
– Includes mounting holes for a 4-20mA temperature converter
– Includes two wall brackets
– Includes a removable 2.5mm² 6-way terminal block
– Output by two M20 cable glands

Dimensions	105 × 105 × 66 mm
Ingress protection	IP69K
Mechanical protection	IK10
Housing raw material	PA66, PC
Volume (cm³)	500

SKU: Y3F1 Categories: Plastic housings, Accessories for electro thermal control boxes Tags: IK10, PA66, plastic housing, enclosure, IP69K, Wall mounting, PC

Red dimensions inside rectangular frames on drawings are used for accessories assembly.

Main features

Wall mounting temperature sensor enclosure
– Transparent polycarbonate cover
– Features a sealed sensor cable exit system at the top
– Includes mounting bosses for printed circuit boards
– Includes mounting holes for a 4-20mA temperature converter
– Includes two wall brackets
– Includes a removable 2.5mm² 6-way terminal block
– Output by two M20 cable glands

Size: dia.105 x 66mm

Volume: 500 cm³

Material: black PA66 and transparent PC

Ingress protection: IP69K

Mechanical impact resistance: IK10

Main references

Show references

3D models are available on request under .stp format

Downloads

Datasheet

Y3F1 Datasheet

Drawings

Y3F1 drawing (.dwg)

Technical informations associated to this product

Electrical protection classes
The housings are designed to protect electrical equipment located inside. This protection must be considered in the electrical and environmental angles.)
Technical introduction of connection blocks made in ceramic and polyamide
Ceramic was the first insulating material used in the electrical connection terminals. Mechanically resistant, exceptionally fire resistant, excellent electrical insulator, it had all the qualifications. Produced from locally available raw materials, ceramic and porcelain glazed electro-technical parts were essential in the beginnings of electricity until the appearance of Bakelite in the 1930s, then of engineered thermoplastics to 1960.
Main properties of plastic raw materials used for enclosures
The classic housings, with only 5 sides and a lid, require a long and costly layout, most of the time ignoring the application needs: security, fire resistance, water penetration, shocks, UV, temperature, etc.
Float level switches technical introduction
Selecting a magnet for a level switch application must take into account the characteristics of the liquid in which it will be immersed, of the temperature at which it will be subjected, of its corrosion resistance, of the magnetic field required to operate the switch and its distance to the reed switches. Sintered magnets are shock and vibration sensitive, “bonded” magnets have a low temperature resistance due to the resins used to agglomerate, and Neodymium –Iron-Boron magnets contain 60-75% iron (amount is dependent on grade) and are therefore prone to corrosion.

With connection block C	Without connection block C
Y3F1000022AH400T	Y3F1000022A0000T

Wall mounting temperature sensor enclosure, In PA66 and PC, Y3F1

Main features

Main references

3D models are available on request under .stp format

Downloads

Datasheet

Drawings

Related products

Technical informations associated to this product

Electrical protection classes

Technical introduction of connection blocks made in ceramic and polyamide

Main properties of plastic raw materials used for enclosures

Float level switches technical introduction

Login

Register