Send an inquiry

Immersion heater enclosure with extension, in PA66 and PC Y3F3

– Includes two wall brackets
– Extension on the back for 1″1/4, 1″1/2 and M45x2 immersion heaters with double thread and internal nut, or single thread with rotating ring
– Removable 6-way terminal block
– Output by two M20 cable glands

Dimensions 105 × 105 × 66 mm
Ingress protection

Housing raw material

,

Volume (cm³)

SKU: Y3F3 Categories: , , Tags: , , , , , ,

Red dimensions inside rectangular frames on drawings are used for accessories assembly.

Main features

Immersion heater enclosure with extension
– Transparent polycarbonate cover
– Includes two wall brackets
– Extension on the back for 1″1/4, 1″1/2 and M45x2 immersion heaters with double thread and internal nut, or single thread with rotating ring
– Removable 6-way terminal block
– Output by two M20 cable glands

Size: dia.105 x 87mm

Volume: 583 cm³

Material: black PA66 and transparent PC

Ingress protection: IP69K

Mechanical impact resistance: IK10

 

Main references

3D models are available on request under .stp format

Downloads

Datasheet

Drawings

Related products

Quick View

Plastic housings

Sub-miniature PA66 enclosure, removable wall mounting bracket and pilot light, Y3A2

Quick View

Plastic housings

Temperature sensor, thermostat or level sensor PA66 enclosure, Y3B1

Quick View

Plastic housings

Enclosure with window, for controls, connection, temperature sensor, thermostat, level sensor, GFCI, Y3N2

Quick View

Plastic housings

Wall mounting temperature sensor enclosure, In PA66 and PC, Y3F1

Quick View

Plastic housings

Miniature PA66 enclosure, external connection block, Y3A4

Quick View

Plastic housings

Enclosure for controls, connection, temperature sensor, thermostat, level sensor, Y3N1

Quick View

Plastic housings

Big size enclosure with extension, for immersion heater, Y3M1

Quick View

Plastic housings

Polypropylene temperature sensor enclosure highly corrosive environments, Y3C8

Technical informations associated to this product

  • Electrical protection classes

    The housings are designed to protect electrical equipment located inside. This protection must be considered in the electrical and environmental angles.)

  • Main properties of plastic raw materials used for enclosures

    The classic housings, with only 5 sides and a lid, require a long and costly layout, most of the time ignoring the application needs: security, fire resistance, water penetration, shocks, UV, temperature, etc.

  • Overview of immersion heater fittings

    In Europe there are two common types of threads used on immersion heaters fittings. Threads according ISO 228-1, also said BSPP or cylindrical gas thread (G). 2mm pitch metric thread according ISO965-1, little used, which was the subject of an attempt to replace the ISO228-1 in the middle of the 20th

  • Guide for immersion heater selection

    Figures provided in this section are results of tests made in our laboratory. Charts were smoothened by computer, and are given for specified power and for information only.