Aluminum enclosure, with polycarbonate cover, for immersion heater with 120 mm offset fitting, Y3J1
– Can accommodate all types of fittings up to M77x2 (with threaded ring or rotating ring)
– Up to 2” the fittings are mounted on an aluminum plate that can be rotated to orient the enclosure during installation, without having to open it
| Dimensions | 182 × 132 × 210 mm |
|---|---|
| Ingress protection | |
| Mechanical protection | |
| Housing raw material | |
| Volume (cm³) |
Red dimensions inside rectangular frames on drawings are used for accessories assembly.
Main features
Aluminum and plastic composite enclosure, with polycarbonate cover, for immersion heater with 120 mm offset fitting
– Can accommodate all types of fittings up to M77x2 (with threaded ring or rotating ring)
– Up to 2” the fittings are mounted on an aluminum plate that can be rotated to orient the enclosure during installation, without having to open it
– Can receive a power contactor
– Can receive an internal connection block up to 12 ways and up to 10mm²
– Output by one or two M25 cable glands
Size: 182 x 132 x 210mm
Volume: 3066 cm³
Material: Aluminium with polycarbonate cover
Ingress protection: IP69K
Mechanical impact resistance: IK10
Main references
3D models are available on request under .stp format
Downloads
Related products
Metallic housings
Stainless steel Immersion heater or temperature sensor, flat cover, Y3SA
Metallic housings
Round, large diameter, simplified immersion heater enclosure, Y3K2
Metallic housings
Miniature enclosure for temperature sensor or level sensor, Y3L2
Air heater and ventilation boxes
Large size enclosure for immersion heater, finned heaters with external adjustment knob, Y3P6
Metallic housings
Miniature enclosure for temperature sensor or level sensor, Y3L1
