Enclosure with window for immersion heaters, with extension, Y3N3
– Extension on the back for 1 “1/4, 1” 1/2 and M45x2 immersion heaters with double thread and internal nut, or single thread with rotating ring
– Front panel with hinged polycarbonate porthole
– Several models of removable internal terminal blocks are available (up to 12 channels, 2.5, 6 and 10mm²)
– Several models of cable gland plate holder, with many possibilities, including for flat cables, from 1 to 4 outlets, up to M25
| Dimensions | 130 × 180 × 120 mm |
|---|---|
| Ingress protection | |
| Volume (cm³) |
Red dimensions inside rectangular frames on drawings are used for accessories assembly.
Main features
Enclosure with window for immersion heaters, with extension
– Extension on the back for 1 “1/4, 1” 1/2 and M45x2 immersion heaters with double thread and internal nut, or single thread with rotating ring
– Front panel with hinged polycarbonate porthole
– Several models of removable internal terminal blocks are available (up to 12 channels, 2.5, 6 and 10mm²)
– Several models of cable gland plate holder, with many possibilities, including for flat cables, from 1 to 4 outlets, up to M25
Size: 130 x 180 x 120 mm
Volume: 2093 cm³
Material: PA66 housing and PC transparent window
Ingress protection: IP69K
Mechanical impact resistance: IK10
Main references
To access download documents, please Login/Register. Datasheet, drawings (.dwg), 3D models (.stp) and other documents are available.
Downloads
Related products
Plastic housings
Simplified round enclosure for 2”1/2 and M77x2 fittings, Y3C3
Plastic housings
Miniature PA66 enclosure, removable wall mounting bracket, Y3A3
Plastic housings
Immersion heater housing for commercial water heater tanks, Y3B2
Plastic housings
