Send an inquiry

DPNC manual reset high limit, fail safe

Housing dimensions: 43 x 35 x 29 mm (without terminals and diaphragm)

Capillary: copper, capillary length 250mm or 900 mm, 150 mm long PVC sleeve on capillary.

Electrical rating

Voltage

Max operating temperature (°C)

Opening temperature (°C)

, , , , , , ,

Min resettable temperature (°C)

Capillary length (mm)

Bulb length (mm)

Max temperature on bulb (°C)

,

Bulb diameter (mm)

SKU: N/A Category: Tags: , , , ,

TECHNICAL FEATURES

Housing dimensions: 43 x 35 x 29 mm (without terminals and diaphragm)

Capillary: copper, capillary length 250mm or 900 mm, 150 mm long PVC sleeve on capillary. Capillary minimum bending radius 5 mm. For technical reasons, we do not recommend to use capillary length longer than 900 mm.

Bulb: copper, corkscrew type for temperatures from 60 to 130°C(140 to 266°F), tubular dia 6 mm from 130°C to 170°C(266 to 338°F).

Temperature sensing element: Liquid-filled thermostatic assembly whose boiling causes tripping of the contact. Therefore, unlike liquid filled systems, these thermostats are sensitive to atmospheric pressure, and their reaction time is slower.

Terminals: 6.35 x 0.8 quick connect terminals Adjustment: fixed setting

Mounting: Front bushing, with M10x1

Manual reset: fail safe action, front access button

Rating: 20A 250VAC

Contacts: DPST  (snap action contact)

Max ambient temperature on head: 125°C

 

Main references

Downloads

Datasheet

Related products

Quick View

Immersion heater temperature limiter boxes

Manual reset immersion heater limiter IP66, IK10

Quick View

Rod temperature limiter boxes

Manual reset electronic rod limiter, IP65

Quick View

FIRE DETECTION

High load breakable glass bulb heat responsive link

Quick View

Immersion heater temperature control boxes

Combination of adjustable set point immersion heater thermostat and manual reset high limit, IP54 housing, 105x88x58.5mm

Quick View

Remote temperature control boxes

Combination of adjustable set point remote thermostat and manual reset high limit, IP54 housing, 105x88x58.5mm

Quick View

Remote temperature limiter boxes

Adjustable manual reset remote sensor electronic limiter IP66, IK10

Quick View

Bulb and capillary temperature limiters

3 pole manual reset high limit, fail safe

Quick View

Rod temperature limiter boxes

Fixed setting manual reset rod limiter, IP65

Technical informations associated to this product

  • Description of temperature controls

    Used as control thermostats or as a safety thermostat with manual reset, these thermostats have a disc made of two different metals laminated together for temperature sensing element. These two metals have different expansion coefficients.

  • Thermostats installation

    The proper functioning of a thermostat depends primarily on the correct choice of the component, but also the conditions of its installation. Conditions used to calibrate regulating and control equipment in the factory are always ideal laboratory conditions, ensuring measurement accuracy and repeatability. These conditions are rarely those found in practice when installing thermostats. However, with a minimum of constraints, it is possible to optimize assemblies.

  • Electrical contacts

    As numerous mechanisms exist, we decided not to distinguish on the basis of constructive technique, but according to their operation speed, which is the key element.

  • Electrical protection classes

    The housings are designed to protect electrical equipment located inside. This protection must be considered in the electrical and environmental angles.)