Din rail mounting miniature humidistat for electrical cabinets
Main Application: condensation in electrical enclosures and cabinets can be critical for electrical components and safety. This humidistat is designed to switch on a heater or a ventilating fan when the relative humidity raises at dangerous levels, when there is a risk to reach the dew point usually around 65%.
| Weight | 0.5 kg |
|---|---|
| Dimensions | 67 × 31 × 50 mm |
| Maximum setting (%RH) | |
| Minimum setting (%RH) | |
| Measuring accuracy (%RH) | |
| Differential at 50% RH | |
| Electrical rating | |
| Voltage | |
| Min operating temperature (°C) | |
| Max operating temperature (°C) | |
| Min storage temperature (°C) | |
| Max storage temperature (°C) | |
| Ingress protection |
MAIN FEATURES
Main Application: condensation in electrical enclosures and cabinets can be critical for electrical components and safety. This humidistat is designed to switch on a heater or a ventilating fan when the relative humidity raises at dangerous levels, when there is a risk to reach the dew point usually around 65%.
It can also be used to switch on humidifiers, dehumidifiers, or other devices.
Humidity sensing element: hygroscopic polymer film with special treatment, produced by Ultimheat, ensuring a fast response, long life and high stability
Setting range: 35 to 95% RH
Measuring accuracy: ±5% RH
Differential at 50% RH: 8% RH (±3% RH )
Measuring medium: air, pressure-less, non-aggressive
Electrical contact: silver contacts, SPDT, 5A 250V
Connection: 3 screw terminals for 1.5mm² wires, max torque 0.5Nm
Mounting: clip for 35mm DIN rail EN50022
Operating temperature: 0 to+60°C (+32 to +140F)
Storage temperature: -20 to +70°C (-4 to +158F)
Mounting position: vertical
Voltage supply: the humidistat should be mounted such that there is no buildup of condensate on or in the device. If the voltage supply is higher than 48V thereisarisk ofvoltagearcing in theeventofwatercondensation on the micro-switch or connecting terminals which might destroy the control.
Ingress protection class: IP30
Dimension: 67x50x 36mm
Maintenance: The humidity sensing ribbon is maintenance-free in clean air. Air containing solvent can cause measuring errors and failure, depending on the type and concentration. Deposits such as resin aerosols, lacquer aerosols, smokes, which eventually form a water-repellent film are harmful for the measuring element.
DIMENSIONS
Wiring diagram
 |
 |
 |
Technical specifications sheet
Related products
Disc thermostats
Electromechanical humidistats
Mechanical humidistats for incorporation side shaft adjustment
Room and antifreeze temperature control boxes
Miniature room temperature thermostats wall mounting, home appliance style
Plastic housings
Miniature PA66 enclosure, removable wall mounting bracket, Y3A3
Electronic control thermostats
77 x 35mm intelligent humidity and or temperature controller
Connection blocks
Plastic housings
Sub-miniature PA66 enclosure, removable wall mounting bracket, Y3A1
Room and antifreeze temperature control boxes
Electrical cabinet ambient temperature thermostats, Din Rail mounting